OpenCart Community

I installed this tool through the extension installer after enabling FTP. It said install was successful and the modification shows up in modifications but it does not list under system or settings or anyhwhere in the dashboard menu for that matter.

This is after trying to install it manually several times, unsuccessfully :/

Marie

I am having a weird problem. I successfully imported 1142 items but when I look at my list of products I see many duplicates. Some are duplicated as many as 6 times, some are duplicated only once and very few have no duplicates. I have no duplicate ID's at all. I checked PHPMyAdmin and in the oc_products table it shows the exact 1142 items with no duplicates. But this is what I see when I look at my products in OpenCart:

Just to repeat: Most issues described here have nothing to do with the Export/Import tool as such, but rather with OpenCart's installer. The most common causes for install failures are:

1) FTP not enabled
2) No or invalid FTP root
3) Forgetting to click on the Refresh button at Extensions > Modifications after install

Is it compatible with 2.1.0.1 yet?

Thanks

David

davidbfranks wrote:Is it compatible with 2.1.0.1 yet?

Thanks

David

Yes, it is.

Also, it has been updated to a new release (V2.27), with added support for product and category filters and some bugfixes.

Hi @JNeuhoff,

i tried your module before when i had 1.5.6 running and it worked like a charm, today though with 2.0.3.1 version running, and your v2.27 import/export module freshly installed, i have trouble importing.

it exports fine, and it seems to import fine as well (it says it's been imported) but the categories do not appear anywhere. i tried refreshing, and clearing the cache, even checking my database and it's as i feared, it just says it imports it but it doesn't. could you tell me what have i done wrong?

thanks!

elpanda13 wrote:Hi @JNeuhoff,

i tried your module before when i had 1.5.6 running and it worked like a charm, today though with 2.0.3.1 version running, and your v2.27 import/export module freshly installed, i have trouble importing.

it exports fine, and it seems to import fine as well (it says it's been imported) but the categories do not appear anywhere. i tried refreshing, and clearing the cache, even checking my database and it's as i feared, it just says it imports it but it doesn't. could you tell me what have i done wrong?

thanks!

Make sure to include your admin backend language as an active frontend language, too, otherwise the imported products won't show up in the admin backend.

JNeuhoff wrote:Yes, it is.

Also, it has been updated to a new release (V2.27), with added support for product and category filters and some bugfixes.

Seems I connot find the importer/exporter under Tools.. Where is it located in 2.1.0.1?
Thanks for you great tool!

BR,
Tim

Hi
Firstly thank you for extension update. Installed and worked first time.

One question when i upload and use add or full option in attributes only inserts the last set ,
i.e.

product_id attribute_group attribute text(en)

1 Book Information Condition New
1 Book Information Pages 400
1 Book Information Publisher Holland

Only the third is added

Is there a way to get the system to accept all 3?

Thanks

Subatwest

TAC wrote:so I uploaded the files via ftp. I have since refreshed Modifications as well several times.

I am able to see the tool in the User Groups but it does not show up on the Tools Menu or in the Modifications list either.

I am using OC 2.0.3.1 with the Journal 2 Theme and opencart-2-0-x-export-import-multilingual-2-26.ocmod.zip

I have not installed vqmod as I thought I didn't have to with 2.0.

What might I have missed?

Thank you

I've done this again on another installation and still the Export/Import does not show up on the Tools Menu or in the Modifications list either

tjsystems wrote:

JNeuhoff wrote:Yes, it is.

Also, it has been updated to a new release (V2.27), with added support for product and category filters and some bugfixes.

Seems I connot find the importer/exporter under Tools.. Where is it located in 2.1.0.1?
Thanks for you great tool!

BR,
Tim

It should be under the Tools menu. If niot, something went wrong with your installation. Most common causes for this:

1) FTP not enabled
2) Wrong or missing FTP root
3) Forgot to do a Refresh in Extensions > Modifications after install

JNeuhoff wrote:

tjsystems wrote:

JNeuhoff wrote:Yes, it is.

Also, it has been updated to a new release (V2.27), with added support for product and category filters and some bugfixes.

Seems I connot find the importer/exporter under Tools.. Where is it located in 2.1.0.1?
Thanks for you great tool!

BR,
Tim

It should be under the Tools menu. If niot, something went wrong with your installation. Most common causes for this:

1) FTP not enabled
2) Wrong or missing FTP root
3) Forgot to do a Refresh in Extensions > Modifications after install

Hmm, did al the above steps.. still no luck.

After Disable and then Enable the module again, and a refresh.... It's now showing in Tools.

It should be under the Tools menu. If niot, something went wrong with your installation. Most common causes for this:

1) FTP not enabled
2) Wrong or missing FTP root
3) Forgot to do a Refresh in Extensions > Modifications after install

Hmm, did al the above steps.. still no luck.

After Disable and then Enable the module again, and a refresh.... It's now showing in Tools.

I followed those steps too and still E/I is not showing in the Tools. It is not showing in Modifications either so I cannot disable and enable it. Screen shots attached.

I've used this extension for a number of 1.5x sites, works like a charm!
But now I'm trying it on a 2.0.3.1 site and only the active language is exported. Am I doing something wrong?

JNeuhoff wrote: Make sure to include your admin backend language as an active frontend language, too, otherwise the imported products won't show up in the admin backend.

Already did that (before i asked you the question), but there's nothing in there, not even in the database, so it's not importing a thing :/

here's all i've done so far:
1) installed the module via the module manager
2)went to modifications and refreshed everything
3)added admin access and permissions on user agents

is there something else i have to do? i have translations for BOTH my languages (english and italian) and have filled the obligatory fieds. on italian language translated categories i have already made suure there are no "special characters" and have tried uploading both an excel worksheet and an openoffice one.

here's both my files, check them out: https://www.dropbox.com/sh/epzwspdk17o7 ... eLeSa?dl=0

i really appreciate you helping my case!

Hi @JNeuhoff,

Have you managed to look at my question? My site is near ready to complete and would really appreciate your insight on the attribute issue, as I have a large number to update.

Grateful for any help.

Regards
Subatwest

TAC wrote:

It should be under the Tools menu. If niot, something went wrong with your installation. Most common causes for this:

1) FTP not enabled
2) Wrong or missing FTP root
3) Forgot to do a Refresh in Extensions > Modifications after install

Hmm, did al the above steps.. still no luck.

After Disable and then Enable the module again, and a refresh.... It's now showing in Tools.

I followed those steps too and still E/I is not showing in the Tools. It is not showing in Modifications either so I cannot disable and enable it. Screen shots attached.

What's in your FTP root?

SubatWest wrote:Hi
Firstly thank you for extension update. Installed and worked first time.

One question when i upload and use add or full option in attributes only inserts the last set ,
i.e.

product_id attribute_group attribute text(en)

1 Book Information Condition New
1 Book Information Pages 400
1 Book Information Publisher Holland

Only the third is added

Is there a way to get the system to accept all 3?

Thanks

Subatwest

You have to define all your attributes first before using them in the products. Otherwise it won't add them.

I could not get the mod installer to work so I uploaded the files via ftp. I have since refreshed Modifications as well several times.

I am able to see the tool in the User Groups but it does not show up on the Tools Menu or in the Modifications list either.

I am using OC 2.0.3.1 with the Journal 2 Theme and opencart-2-0-x-export-import-multilingual-2-26.ocmod.zip

I have not installed vqmod as I thought I didn't have to with 2.0.

What might I have missed?

TAC, this is exactly the problem I have.

I think I may have found a solution, but didn't have time to test it yet.

The key is the file install.xml inside the opencart-2-0-x-export-import-multilingual-2-26.ocmod.zip file.

If you look at it, you can see it's probably supposed to modify some files -- notably admin/controller/common/menu.php and some others -- and add the respective menu entries in them in order for the extension to be accessible.

When the installation process doesn't work and you upload the extension manually, these changes of course don't happen. That's why you can't see the tool in the administration. It should be possible to modify the files such as menu.php manually, according to what's described in the install.xml file. It's a dirty hack but it should work.

As I said, I didn't have time to test that yet, if you can try it I'll be happy to hear whether you succeeded or not, otherwise I'll get back to you here after I can test it myself.

have a nice day
bhy

Hi again

Yes I have created attributes.
product_id attribute_group attribute text(en)
1 Book Information ISBN 978184833929, 8601418255062
2 Book Information ISBN 1849833923, 9781849833929

76 Book Information ISBN 0862819784, 9780862819781
77 Book Information ISBN 0709027656, 9780709027652
78 Book Information ISBN 0297813102, 9780297813101
1 Book Information Pages 144
2 Book Information Pages 400
3 Book Information Pages 672

76 Book Information Publisher Hodder & Stoughton
77 Book Information Condition Oakleaf Publishing
78 Book Information Condition Oxford Press


These are a sample from my excel file

Using opencart 2.1.0.1 excel 2010 win 10

Subatwest