Post by stringsetc » Fri Feb 17, 2012 12:09 am

Hi guys,

Firstly I must say how impressed both myself and my colleague have been with opencart, what an absolute godsend. All of the functionality of the pay monthly carts but for free with better support :p

After hours of messing around with various things we've got our site live (http://www.stringsetc.co.uk) however I've got one im guessing fairly simple mod I need some guidance on.

Is there any way to output the shipping address twice on the standard invoice OC generates. I want to use labels with a pre printed sticky , like the ones from http://www.cheap-integratedlabels.co.uk/ for my invoices. I'm happy enough with the standard invoice and its layout but need to get the shipping address displaying bottom left on the page , in addition to where it is already. I plan to then just pull off the duplicated address on its sticky label and use that for addressing my packages.

We were going to integrate with linnworks but in reality ebay and amazon only account for a small amount of our trade.

If anybody can point me in the right direction i'd be most grateful.

We're running oc v1.5.1.3

Active Member

Posts

Joined
Thu Feb 16, 2012 11:59 pm

Post by stringsetc » Fri Feb 17, 2012 4:22 am

bump

anybody got any ideas?

Active Member

Posts

Joined
Thu Feb 16, 2012 11:59 pm

Post by uksitebuilder » Fri Feb 17, 2012 4:07 pm

Looking at doing something for this in my Delivery Notes extension. Probably about a week away from updating it.

User avatar
Guru Member

Posts

Joined
Thu Jun 09, 2011 11:37 pm
Location - United Kindgom

Post by yubnub » Sat Feb 18, 2012 1:01 am

removed
Last edited by yubnub on Wed Nov 07, 2012 4:39 pm, edited 1 time in total.

New member

Posts

Joined
Mon Nov 28, 2011 1:38 am

Post by stringsetc » Mon Feb 20, 2012 8:58 pm

That is exactly what I'm looking for Anthony.

No reason why they are at the bottom, it I just struggled to find labels with just one at the top, but I agree the sender label might be a good reason for using 2 (was going to print those separately).

If you could send the tpl for me to take a look at I'd be most grateful. Will have royal mail packetpost sorted next week so the labelling really needs sorting out.

my email is opencart@stringsetc.co.uk

thank you.

Active Member

Posts

Joined
Thu Feb 16, 2012 11:59 pm

Post by yubnub » Mon Feb 20, 2012 10:04 pm

removed
Last edited by yubnub on Wed Nov 07, 2012 4:39 pm, edited 1 time in total.

New member

Posts

Joined
Mon Nov 28, 2011 1:38 am

Post by dimko » Mon Feb 20, 2012 10:37 pm

@yubnub: Are those paper sheets all sticky, or just the parts that are supposed to be sticky? What I mean is, if the whole A4 acts like a sticker, or only the parts?

Thanks for the info.

Using OpenCart v1.5.1.3


Active Member

Posts

Joined
Sun Sep 25, 2011 2:10 am

Post by stringsetc » Thu Feb 23, 2012 8:05 pm

I've now taken delivery of my intergrated labels and the invoce tpl (thanks anthony) works a treat. However there seems to be a excessively large gap between the labels and the start of the invoice, meaning any order with more than 3-4 items spills over onto the next page. very annoying

if anyone could cast their eye over the .tpl (im sure its a 2second job if you know what you're looking for) that would be great. just pm me for the file .

thanks again

Active Member

Posts

Joined
Thu Feb 16, 2012 11:59 pm

Post by dimko » Thu Feb 23, 2012 8:18 pm

dimko wrote:@yubnub: Are those paper sheets all sticky, or just the parts that are supposed to be sticky? What I mean is, if the whole A4 acts like a sticker, or only the parts?

Thanks for the info.
@stringsetc: Same question to you :)

Using OpenCart v1.5.1.3


Active Member

Posts

Joined
Sun Sep 25, 2011 2:10 am

Post by stringsetc » Thu Feb 23, 2012 8:22 pm

the two top parts of the labels are sticky. so you print your invoice and then peal off the two addresses. one of yours (sender) and the other is the shipping address for your customer. saves a load of time.

still need somebody to look at my .tpl file..

Active Member

Posts

Joined
Thu Feb 16, 2012 11:59 pm

Post by dimko » Thu Feb 23, 2012 8:29 pm

stringsetc wrote:the two top parts of the labels are sticky. so you print your invoice and then peal off the two addresses. one of yours (sender) and the other is the shipping address for your customer.
Yeah, I got that part, but the other surface of the paper is a plain regular paper, or...?

Using OpenCart v1.5.1.3


Active Member

Posts

Joined
Sun Sep 25, 2011 2:10 am

Post by stringsetc » Thu Feb 23, 2012 10:38 pm

the rest of the paper is regular paper. the only bits that are sticky are those at the top. hope that makes sense.

Active Member

Posts

Joined
Thu Feb 16, 2012 11:59 pm

Post by stringsetc » Thu Feb 23, 2012 10:38 pm

removed
Last edited by stringsetc on Wed Nov 07, 2012 6:30 pm, edited 1 time in total.

Active Member

Posts

Joined
Thu Feb 16, 2012 11:59 pm

Post by dimko » Thu Feb 23, 2012 11:28 pm

stringsetc wrote:the rest of the paper is regular paper. the only bits that are sticky are those at the top. hope that makes sense.
Yeap, now it's clear ;) Thanks a lot for the info.

Using OpenCart v1.5.1.3


Active Member

Posts

Joined
Sun Sep 25, 2011 2:10 am

Post by dimko » Thu Feb 23, 2012 11:32 pm

Regarding the space, would you mind putting one printed invoice, so we can take a look at it? Also, have you tried to loose some of those many <br> ?

Using OpenCart v1.5.1.3


Active Member

Posts

Joined
Sun Sep 25, 2011 2:10 am

Post by stringsetc » Thu Feb 23, 2012 11:44 pm

I feel such an idiot. got rid of all but one of the <br>'s and its spot on.

what a plonker. was so simple. thanks for pointing it out though :)

Active Member

Posts

Joined
Thu Feb 16, 2012 11:59 pm

Post by dimko » Thu Feb 23, 2012 11:51 pm

No problem at all, I'm glad I helped :)

Using OpenCart v1.5.1.3


Active Member

Posts

Joined
Sun Sep 25, 2011 2:10 am
Who is online

Users browsing this forum: FazalFariz and 90 guests