Hi gkasios,
Great extension!
I have one question.
Is it possible to add in the selection of customer group "all customer groups" ? now we can select only one group.
But we have different customer groups (consumer and business), and we want the c.o.d. is active only for geozone for our country but for consumer and business. Now we can only set it for one group in the dedicated geozone.
See attached screenshot.
Thank you in advance.
Best regards,
Dennis
Great extension!
I have one question.
Is it possible to add in the selection of customer group "all customer groups" ? now we can select only one group.
But we have different customer groups (consumer and business), and we want the c.o.d. is active only for geozone for our country but for consumer and business. Now we can only set it for one group in the dedicated geozone.
See attached screenshot.
Thank you in advance.
Best regards,
Dennis
Attachments
screenshot_gop_cod.jpg (166.87 KiB) Viewed 12541 times
Hi
Thank you for downloading. To your question the group selection doesn’t limit you to one customer group but rather it allows you to have even different options for every customer group. Basically the idea of configuring this extension is like this
Shipping Extension > Geo Zone > Customer Group
so depending on the previous three you will get different options to configure. To understand it better just make some options for the one group and then just click and change group and you will see that the options changed.
Thank you for downloading. To your question the group selection doesn’t limit you to one customer group but rather it allows you to have even different options for every customer group. Basically the idea of configuring this extension is like this
Shipping Extension > Geo Zone > Customer Group
so depending on the previous three you will get different options to configure. To understand it better just make some options for the one group and then just click and change group and you will see that the options changed.
It is the same thing just swap
to
and reverse.
Code: Select all
$enabled=true;
Code: Select all
$enabled=false;
Καλησπέρα!
Χρησιμοποιώ την εφαρμογή σας και είναι πάρα πολύ καλή και σας ευχαριστούμε που την παρέχετε δωρεάν.
Αντιμετωπίζω το εξής πρόβλημα.
Όταν δημιουργώ μια νέα παραγγελία μέσα από το admin panel ενώ στα totals την εμφανίζει σαν payment method όταν πατάω το update totals δεν προσθέτει το κόστος (flat rate) που του έχω ορίσει...
Καμιά ιδέα?
Χρησιμοποιώ την εφαρμογή σας και είναι πάρα πολύ καλή και σας ευχαριστούμε που την παρέχετε δωρεάν.
Αντιμετωπίζω το εξής πρόβλημα.
Όταν δημιουργώ μια νέα παραγγελία μέσα από το admin panel ενώ στα totals την εμφανίζει σαν payment method όταν πατάω το update totals δεν προσθέτει το κόστος (flat rate) που του έχω ορίσει...
Καμιά ιδέα?
Καλησπέρα
το πρόβλημα είναι γνωστό και οφείλεται στον ίδιο το σχεδιασμό του OpenCart που υποθέτει ότι όλες οι πληρωμές δεν έχουν κόστος. Ελπίζουμε ότι στην επόμενη έκδοση αυτό θα αλλάξει αλλιώς θα βγάλουμε κάποιο VQMod να παρακάμπτει αυτή την λογική.
το πρόβλημα είναι γνωστό και οφείλεται στον ίδιο το σχεδιασμό του OpenCart που υποθέτει ότι όλες οι πληρωμές δεν έχουν κόστος. Ελπίζουμε ότι στην επόμενη έκδοση αυτό θα αλλάξει αλλιώς θα βγάλουμε κάποιο VQMod να παρακάμπτει αυτή την λογική.
Καλησπερα θελω να κανω το εξης: αν το total ειναι μικροτερο καποιας τιμης το κοστος της αντκαταβολης να ειναι σταθερο, αλλα οταν το total υπερβει μια τιμη να αλλαζει και το κοστος αλλα να εμφανιζει καπως και ενα μηνυμα στον πελατη οτι αλλαξε το κοστος επειδη το συνολο της τιμης ειναι πολυ μεγαλο. μπορει καπως να γινει αυτο? Ευχαριστω!
Καλησπέρα
Δοκιμάστε τον παρακάτω κώδικα
Επιλέγουμε custom πληρωμή
Δοκιμάστε τον παρακάτω κώδικα
Επιλέγουμε custom πληρωμή
Code: Select all
If($this->getTotal()<100)
{
$cost_and_tax =10;
}
else
{
$cost_and_tax =100;
$title=$this->formatCurrency($cost_and_tax). '(Λόγο μεγάλου κόστους της παραγγελίας διαμορφώθηκε η τιμή τις αντικαταβολής)';
}
Καλησπέρα ήταν πολύ χρήσιμη η βοήθεια σας.
αυτό πετάει internal error
τελικά δούλεψε το εξής
αυτό πετάει internal error
Code: Select all
If($this->getTotal()<100)
{
$cost_and_tax =10;
}
else
{
$cost_and_tax =100;
$title=$this->formatCurrency($cost_and_tax). '(Λόγο μεγάλου κόστους της παραγγελίας διαμορφώθηκε η τιμή τις αντικαταβολής)';
}
Code: Select all
If($total<100)
{
$cost=10;
}
else
{
$cost=100;
$title=$cost . '€ (Λόγο μεγάλου κόστους της παραγγελίας διαμορφώθηκε η τιμή τις αντικαταβολής)';
}
Καλησπέρα
ο κώδικας έχει ελεχθεί και είναι σωστός ελέξτε τι αναφέρει το λάθος μήπως δεν αντιγράφηκε κατι.
Επίσης αντικαταστήστε το $total με το $this->getTotal() γιατί το πρώτο δεν επιστρέφει πάντα την σωστή τιμή αν κάποιος κάνει πίσω ένα βήμα.
Τον υπόλοιπο κώδικα μπορείτε να τον αφήσετε όπως σας βολεύει.
ο κώδικας έχει ελεχθεί και είναι σωστός ελέξτε τι αναφέρει το λάθος μήπως δεν αντιγράφηκε κατι.
Επίσης αντικαταστήστε το $total με το $this->getTotal() γιατί το πρώτο δεν επιστρέφει πάντα την σωστή τιμή αν κάποιος κάνει πίσω ένα βήμα.
Τον υπόλοιπο κώδικα μπορείτε να τον αφήσετε όπως σας βολεύει.
Αντιμετωπίζω το ίδιο θέμα αλλά βρήκα ένα πρόχειρο τρόπο να το λύσω.evakotsi wrote:Οπότε ούτε edit μπορεί να γίνει μια παραγγελία από το admin panel για τον ίδιο λογο :/
Σας ευχαριστώ για την άμεση απάντησή σας!
Δημιούργησα ένα προιόν που ονομάζεται Αντικαταβολή, έδωσα τιμη την τιμή της αντικαταβολής χωρις ΦΠΑ, κατηγορία ΦΠΑ ανάλογη, και δεν το έβαλα σε καμμία κατηγορία για να μη φαίνεται στη σελίδα. Τώρα όταν προσθέτω προιόντα σε μια παραγγελία απο το administration απλά προσθέτω και αυτό το προιόν. Εφ' όσον η αντικαταβολή στη σελίδα μου είναι σταθερή αυτη η λύση με βολεύει.
Hi there,
Thank you for the great extension; however, i wish to insert some code to disable the COD method but at the same time display a message if disabled. For example:
I want to disable for any order value above: 8000 but echo some message saying "You have reach order value 8000 for Cash on Delivery" or something..i put the below code, it disable the COD but how to display with some message someting like that?
Also can we disable it for certain categories? one or more...how to put that code?
Thank you for the great extension; however, i wish to insert some code to disable the COD method but at the same time display a message if disabled. For example:
I want to disable for any order value above: 8000 but echo some message saying "You have reach order value 8000 for Cash on Delivery" or something..i put the below code, it disable the COD but how to display with some message someting like that?
Code: Select all
$my_total=$this->getTotal();
if($my_total>8000)
{
$enabled=false;
}
HI,
I have this situation, I need to know if your extension will help me:
2 shipping options X and Y that if chosen the COD to be disabled
and
1 shipping option Z that if chosen the only option of payment to be COD
I have to mention that all shipping options are made with X-shipping
Thank you
I have this situation, I need to know if your extension will help me:
2 shipping options X and Y that if chosen the COD to be disabled
and
1 shipping option Z that if chosen the only option of payment to be COD
I have to mention that all shipping options are made with X-shipping
Thank you
Who is online
Users browsing this forum: No registered users and 42 guests